| |
|||
|
MRB625
Information for Collecting Used and Vintage Cameras click here (VintageCamerasOnline)
|
PX625/ MRB625 Wein Cell Mercury-free Replacement Batteries - new
life for your old camera! Type: Zinc Air. Voltage: 1.35 V.
Diameter: 15.6 mm. Height: 5.95 mm. . Replacement for: PX625 / PX13 / H-D / MR9 / KX625 / RPX625 / LR09 / PX625A / D625 / EPX625G / V625U / KA625 / RPX625A / V625U / EPX625BP / HD1560 / EPX625. Overview: The Wein Cell MRB625 has a distinctive appearance with its 'stepped' concentric disks. The WeinCELL MRB625 is a custom zinc/air battery designed to replace banned mercury batteries. Unlike 1.5v alkaline replacements such as the LR9 whose unstable output can produce exposure errors, WeinCells deliver the same 1.35 V voltage and stability of output as did the mercury batteries. In contrast to hearing aid batteries which only last 1 month, the WeinCell MRB625 batteries last much longer, some times up to a year. To achieve this longer life, the MRB625 used a proprietary electrolyte and has only two small air holes, rather then the 7 larger holes found in standard hearing aid batteries. To use the WeinCell MRB625, the adhesive tab must be removed. This allows air to enter the cell. After about 30 minutes, the MRB625 is fully activated and ready for use. An alternative mercury free replacement for the PX625 is the silver oxide S625PX. These S625PX cells produce 1.55V which is higher than the 1.35V produced by the original PX625 mercury cell. Because the S625PX silver oxide cell produces a steady 1.55V, you are able to compensate for the higher voltage by a fixed number of stops or by adjusting the ASA setting. There may be as many as two f-stops underexposure by a camera that uses 1.55v instead of the original 1.35v, but the compensation you require is constant. I will be offering these Silver Oxide units later this month. Click HERE to order the WeinCell PX625 today |
||
| |
|||
|
|||